RMK Black & Red Stitched Leather Belts

A Black Friday Special - Premium Black Wickett & Craig Belts with unique red stitching!

If you're after a unique finish on our robust men's leather belts, this is the answer! The same durable leather with a red stitched border. RMK belts are cut 37mm wide straight from premium leather sides to ensure a robust hard wearing belt that will last.

All belts are bevelled, hand sanded & burnished before leaving the shop, for a belt that you'll enjoy wearing for years to come.

Hardware

Buckles -  Our black & red belts are assembled with your choice of stainless steel or solid brass buckles & keepers.

Chicago Screws - If you like the option to change out your buckles, Chicago Screws are a great choice. Just make sure you check them every now and then to ensure they are tight. If you lose a screw, click here to order a replacement set.

Fixed Hardware - We apply thread locker to the Chicago screws so they stay done up forever.

Sizing

There's several ways to make a great fitting belt but you can't get a better fit than with a custom measurement! The measurement you provide will be the middle hole of adjustment and allow the tip of the belt to sit in the first belt loop of your jeans. 

Option 1 - Measuring from an existing belt

This method is the most accurate to get a perfect fit but we understand it’s not always an option when gifting a belt. To measure from a exiting belt, please follow these instructions and enter the measurement in mm. 

PLEASE NOTE - It's very important that the following measurement is correct. Belts are a custom item made specifically for you and can not be resold if a mistake is made providing the measurement. Measure twice just to be sure!

Option 2 - Provide a Jeans waist Measurement

If you don't have an old belt to measure from or perhaps your gifting a belt, we can work from a Jeans Waist Measurement. Please enter the measurement in mm. 

Personalisation

Personalise your belt with up to 6 characters. The initials/text will be stamped on the belt tip and will read the correct way up when the belt is threaded anti clockwise. The letters are a standard Playfair font & approximately 15mm high.

Please enter your text exactly how you would like it to appear including full stops, spaces & upper vs lower case letters.

Once made, custom stamps can be reused at no extra charge on a variety of RMK leather goods. If you require more specification, please leave your comments in the checkout notes section.

Thanks for supporting our small family business!